Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Power Steering Pump on a Toyota Camry?

Model: Toyota Camry Xv40 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the power steering pump on a Toyota Camry, open the hood to access the components in the engine compartment. Here, you can locate the bolts securing the power steering pump from the top and completely loosen them.

Next, loosen the bolts that secure the front wheel to its hub, removing the corresponding wheel well liner as well. At this point, you can unscrew the additional bolts securing the pump and disconnect the appropriate hoses to install the new replacement part.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pump on the Toyota Camry?
How to Replace the Brake Pump on the Toyota Camry?
Toyota Camry (1991-1996 / Xv10) To replace the brake pump on the Toyota Camry, open the hood and access the engine compartment, locating the pump at the rear of the compartment, jus…
How to Replace the Fuel Pump on a Toyota Camry V6
How to Replace the Fuel Pump on a Toyota Camry V6
Toyota Camry (2006-2013 / Xv40) In this brief guide, learn how to remove and replace the fuel pump on a Toyota Camry V6 by following the instructions below. First, access the rear o…
How to Replace the Windshield Washer Nozzle on a Toyota Camry
How to Replace the Windshield Washer Nozzle on a Toyota Camry
Toyota Camry (2002-2006 / Xv30) To replace the windshield washer pump on a Toyota Camry, loosen the bolts securing the right front wheel so it can be completely removed. After remov…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos