Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Lock on a Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door lock

See other generations:
Video tutorial

In this tutorial, you will see how to replace the rear door lock on a Toyota Camry, a very simple and quick operation. First, open the door in question, then remove both the handle cover and the window switch panel.

Using a Phillips screwdriver, unscrew the exposed screws. Next, pry the panel away from the door along the entire perimeter, unscrew the three indicated bolts using a T30 Torx wrench, and remove the lock from its housing.

At this point, simply disconnect the two cables, position the replacement, and follow the reverse procedure.


Updated on 8 November 2026 by ScegliAuto


Related tutorials

How to replace the front door lock in the Toyota Camry?
How to replace the front door lock in the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this tutorial we can see how to replace the front door lock in the Toyota Camry, a very simple and quick operation. First of all, we open the door…
How to Replace the Exterior Door Handle on a Toyota Camry XV40
How to Replace the Exterior Door Handle on a Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) This guide shows how to replace the exterior door handle on a Toyota Camry XV40. After removing the service light from the door, disconnect the trim …
How to Replace the Exterior Handle on a Toyota Camry?
How to Replace the Exterior Handle on a Toyota Camry?
Toyota Camry (2011-2019 / Xv50) Replacing the exterior handle on a Toyota Camry, as shown in this tutorial, is a very simple and quick task. First, open the door in question, then r…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos