Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front door lock in the Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door lock

See other generations:
Video tutorial

In this tutorial we can see how to replace the front door lock in the Toyota Camry, a very simple and quick operation. First of all, we open the door we will be working on, then we remove both the inner cover of the mirror and the cap inside the handle.

We then remove the switch panel, remove the additional cover, and unscrew all the screws that have been released. Once the panel is separated from the door, we simply detach the waterproof sheet, unscrew the three screws securing the lock, install the replacement, and reassemble everything following the reverse procedure.


Posted on 28 October 2025 by ScegliAuto


Related tutorials

How to replace the rear door lock in the Toyota Camry?
How to replace the rear door lock in the Toyota Camry?
Toyota Camry (2011-2019 / Xv50) In this tutorial we can see how to replace the rear door lock in the Toyota Camry, an extremely simple and quick operation. First of all, we open the…
How to Replace the Exterior Door Handle on a Toyota Camry XV40
How to Replace the Exterior Door Handle on a Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) This guide shows how to replace the exterior door handle on a Toyota Camry XV40. After removing the service light from the door, disconnect the trim …
How to Remove the Front Door Inner Panel on the Toyota Camry XV40
How to Remove the Front Door Inner Panel on the Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) This guide shows how to remove the front door inner panel on the Toyota Camry XV40. The first step is to remove the courtesy light from the bottom of…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos