Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on a Toyota Avensis?

Model: Toyota Avensis T270, MK 3 - Years 2009-2018
Part: Service warning light

To reset the "Service" light on a Toyota Avensis, start by turning on the instrument panel without starting the engine. Locate the button located under the instrument panel, usually on the right side. Press and hold this button while turning off and on the instrument panel. During this procedure, a message related to resetting the maintenance reminder will appear on the display. Continue to hold the button until the message disappears and the "Service" light turns off. This process allows you to reset the counter and set the system to monitor the next maintenance interval. It is essential that the engine oil and filter have been replaced before performing the reset, to ensure the proper functioning of the system. If you have difficulty or doubts, consult the vehicle manual or contact an authorized workshop. Remember that this procedure does not require special tools and is quite simple, but it should be done carefully.

Posted on 9 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Avensis (2009-2018 / T270, MK 3) Here are the instructions and steps on how to reset the service and maintenance light on the Toyota Avensis. First, get in the vehicle and switch on …
Toyota Avensis (2003-2008 / T250, MK 2) In today's tutorial, you will learn how to reset the service light for the oil change maintenance on a Toyota Avensis. Get into the car and turn the …
Toyota Avensis (2009-2018 / T270, MK 3) Let's see how to reset the service light for a Toyota Avensis T270: turn on the dashboard, and we will see the message "oil maintenance required soon…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos