Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to enter the "maintenance mode" of Toyota Hybrid

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

The Maintenance Mode of Toyota hybrid models is a procedure that allows the internal combustion engine to start, even when it normally would not start on its own. It is used during exhaust gas checks, such as periodic inspections, diagnostics, or in certain maintenance situations.

To start it, follow this procedure: press the ignition button without pressing the brake, ensuring that the car is in "P"; press the accelerator all the way down twice; keep the brake pedal pressed and put the gear in "N"; press the accelerator all the way down twice; keep the brake pedal pressed and put the gear in "P", then press the accelerator all the way down twice again: the "maintenance mode" light will turn on on the display.

Keep the brake pedal pressed and press the ignition button; the internal combustion engine will start at 1000 rpm and will not stop until the car is turned off; by accelerating, you can reach up to 2500 rpm, allowing for emissions checks.


Posted on 22 February 2025 by ScegliAuto


Related tutorials

How to reset the service light in the Toyota Prius?
How to reset the service light in the Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) In this tutorial, we will see how to reset the service indicator in the Toyota Prius, a very simple and quick operation that should be done only afte…
How to Replace the Battery of the Toyota Prius Hybrid?
How to Replace the Battery of the Toyota Prius Hybrid?
Toyota Prius (2009-2015 / Xw30, MK 2) To replace the battery of the Toyota Prius Hybrid, lower the rear seats completely. Next, open the tailgate to access the boot and remove the carpet …
How to Replace the Battery Pack of the Toyota Prius Hybrid?
How to Replace the Battery Pack of the Toyota Prius Hybrid?
Toyota Prius (2009-2015 / Xw30, MK 2) This guide shows how to quickly replace the hybrid batteries of the Toyota Prius Hybrid. After securing the vehicle, open the boot and remove the low…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos