Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean and rebuild the starter motor in a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Starter motor

See other generations:
Video tutorial

Cleaning and rebuilding the starter motor is not difficult but it requires a bit of patience. Disconnect the battery, remove the starter motor, usually fixed with two or three bolts, then open it by unscrewing the screws of the back cover.

Check the brushes, if they are worn out, replace them. Clean everything with electrical contact spray and fine sandpaper, especially the collector.

Check the bearings, if they are worn out, replace them. Reassemble everything carefully, grease the friction points and put the starter motor back in place.

Reconnect the battery and test it, if it runs smoothly, you have done a great job. If you do not feel comfortable doing it yourself, contact a professional workshop.


Posted on 30 March 2025 by ScegliAuto


Related tutorials

Replacing the Starter Motor on a Toyota Yaris
Replacing the Starter Motor on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show how to disassemble and replace the starter motor on a Toyota Yaris. First, open the bonnet of the vehicle and disconnec…
How to replace the starter motor on the Toyota Yaris?
How to replace the starter motor on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on the Toyota Yaris, lift the car with a jack to access the components located at the bottom of the engine bay. Here you…
How to Replace the Starter Motor on a Toyota Yaris?
How to Replace the Starter Motor on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on a Toyota Yaris, open the bonnet to access the components inside the engine bay. You will need to loosen the mounting …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos