Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuse Box in a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

To locate the fuse box in a Toyota Yaris, open the driver's side door and find the panel above the steering wheel, above the dashboard. Remove the cover by gently pushing or prying it to access the internal fuse box. In the engine bay, you will find another box near the battery: lift the cover by releasing the tabs.

Inside both boxes, there is a diagram showing the layout of the fuses and relays along with their corresponding amperages. This allows for quick identification and replacement of a faulty fuse without errors.


Posted on 25 February 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) The video attached to this article shows the exact diagram and placement of all the fuses in your Toyota Yaris. Fuses are designed to prevent damage …
Toyota Yaris (2005-2011 / Xp90) Today we will see how to access the external fuse box of the Toyota Yaris. First, we open the car's hood and locate the fuse box, which is located at…
Toyota Yaris (2020-2026 / MK 4) If you have recently purchased the new Toyota Yaris and are wondering where the fuse box is located, then this guide is all you need. Let’s find out …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the Toyota Yaris fuel pump relay located? Read answer

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos