|
Do it yourself
| |||
| ||||
How Stability Control and Traction Control Work on the Toyota Innova Crysta
Model: Toyota Innova Kijang Crysta
An140
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
Let’s see how Stability Control (VSC) and Traction Control (TRC) work on the Toyota Innova Crysta: the TCR/VSC OFF button is a single switch with two functions: briefly pressing it once disables only the Traction Control (TRC) and the TRC OFF light illuminates on the dashboard. This is useful if the wheels slip in mud or sand and more grip is needed to get free. If you hold the button for more than 3 seconds, both TRC and VSC are disabled, and the vehicle skid light turns on the dashboard. This way, the most important driving aids are turned off, so it should only be used in exceptional cases. If the light comes on without pressing the button, there may be a malfunction: check the brake fluid level, tire pressure, and fuses. If the lights remain on, an electronic diagnosis is needed.
Posted on 11 September 2026 by ScegliAuto
Related tutorials
Toyota Innova Kijang Crysta
(2015-2023 /
An140)
To disable the traction control on the Toyota Innova, turn on the instrument panel so you can use the controls on the center panel. Here, locate the …
Toyota Innova Kijang Crysta
(2004-2015 /
An40)
To replace the headlight bulb of the Toyota Innova Kijang Crysta, open the hood to access the components inside the engine compartment. Specifically,…
Toyota Innova Kijang Crysta
(2015-2023 /
An140)
This guide provides instructions on how to properly position the jack for removing and replacing the tire with the spare on the Toyota Innova Kijang …
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
