|
Do it yourself
| |||
| ||||
How to Remove the Radio in a Toyota Proace Verso
Model: Toyota Proace Verso
MK 1
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
To remove the radio from a Toyota Proace Verso, start by removing the plastic trim around the radio unit and the air vents. Insert a plastic lever between the trim and the dashboard and release the clips around the perimeter until it is completely free. Once the trim is removed, locate the screws securing the radio and undo them with an appropriate screwdriver. At this point, grasp the unit and gently pull it out while keeping it aligned. When the radio is out of its housing, disconnect the rear connectors for power, antenna, and other wiring present. After removal, you can proceed with replacement or maintenance. For reassembly, reconnect the connectors, reinsert the unit, screw in the screws, and reposition the trim by pressing until it clicks into place.
Posted on 21 November 2026 by ScegliAuto
Related tutorials
Toyota Proace Verso
(2016-2026 /
MK 1)
Today we will see how to reset the trip information for Trip A and Trip B of the Toyota Proace Verso, produced from 2016 to 2024. Let's turn on the i…
Toyota Proace Verso
(2016-2026 /
MK 1)
The Toyota Proace Verso features the OBD port located inside the cabin, behind the lower panel of the left dashboard. The port is highlighted in oran…
Toyota Proace Verso
(2016-2026 /
MK 1)
If you want to manually change the time displayed on your Toyota Proace but don't know how, don't worry, as this guide outlines all the necessary ste…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Air Conditioner on the Mercedes E-Class?
To reset the air conditioner on the Mercedes E-Class, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, press and hold the REST and 0 buttons located on the center panel of the dashboard. While holding these buttons, you will notice that the air conditioning settings will be restored to their default values. After the reset procedure is complete, you can turn off the ignition again by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |