Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the fuel pump on Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Fuel pump

Does our car have fuel but does not drive? Most likely the fuel pump is not working. To begin we disconnect the battery cables, then, we remove the rear seats of the car. We will find the wiring and a metal piece with screws, which we need to disassemble. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat. We wrap the entire perimeter of the sheet with absorbent paper, then, with a chisel, unscrew the large locking pin. We disconnect the power supply terminals and the liquid circulation tubes. We take out the fuel pump from inside the tank.


Posted on 28 November 2023 by ScegliAuto



Toyota Yaris fuel pump disassembly
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial we will see the steps that will allow us to disassemble and replace the fuel pump or float on the Toyota Yaris. First of al
Toyota Yaris fuel pump disassembly
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial we will see how to disassemble the fuel pump of a Toyota Yaris. Then we will go to disassemble the rear bench as the pump i
How do you replace the fuel pump of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the fuel pump of the Toyota Yaris, you need to remove the rear seat of the car so that you can access the underlying components.

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2011-2019 - Where can I find the inertia switch on the Toyota Yaris? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos