Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Air Filter

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

The engine air filter housing is located at the front right of the engine bay (when viewed from the front), just behind the battery. The cover is simply secured with two bayonet clips: once released, you can lift the cover and remove the old filter.

Ensure there are no residues in the filter housing, insert the new filter, and close the cover by re-engaging the two clips. You may also opt for the installation of a sports-type filter, which, in addition to improving engine performance, will only require cleaning during subsequent maintenance, without needing replacement.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to replace the engine air filter of the Toyota RAV4
How to replace the engine air filter of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) If you own a latest model Toyota RAV4 and want to replace the engine air filter yourself, just read the following guide and follow the short and simp…
How to Replace the Engine Air Filter on the Toyota Rav 4
How to Replace the Engine Air Filter on the Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To replace the engine air filter on the vehicle, proceed as follows: open the bonnet; the air filter is located on the left side. To open the box con…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Toyota Rav 4 (2000-2006 / MK 2, Xa20) The cabin air filter is located on the passenger side, behind the glove compartment: to access it, open the glove compartment door, press the sides t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos