Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Oil filter

See other generations:
Video tutorial

For this model of car, it is recommended to use synthetic oil for four-stroke engines 5W-30. Start by unscrewing the upper cap, from which you will eventually fill the oil. Then access the underside of the car (you can lift it with a jack for better access) and unscrew the drain bolt (clearly shown in the video) with a 14 mm socket.

Collect the used oil in a container.

While the oil drains, you can unscrew the oil filter, being careful as oil will also come out from here. Lubricate the top of the new filter and install it, close the drain bolt, and fill with new oil.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to change the oil and oil filter on a Toyota Yaris?
How to change the oil and oil filter on a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanne…
Where is the Oil Filter Located on the Toyota Yaris?
Where is the Oil Filter Located on the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this video, you can see where the oil filter is located on the Toyota Yaris and how to proceed if you need to replace it. As shown, it is situated…
How to Replace Oil and Filter on a Toyota Yaris
How to Replace Oil and Filter on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) How to replace the engine oil and filter on a Toyota Yaris? In this video guide, learn how to proceed with the replacement. Open the car door and pul…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos