Do it yourself
| ||||
|
How to remove the front headlight of Toyota RAV4 Mk4
Model: Toyota Rav 4
Xa40, MK 4
- Years 2013-2018 The guide shows how to remove the front light of Toyota RAV4 Mk4. This operation is quite simple as it is not necessary to remove the entire front bumper. Once the bonnet is opened, the two bolts on the upper part of the light must be unscrewed. Unscrew the fixing screws of the front grille and the screws of the bumper fit in the wheel arch of the side to be operated. With a little force you can move the bumper so that the last fixing bolt is unscrewed. Pull the light towards the front of the vehicle to remove it; pay attention to the electrical connections that must be disconnected. At this point it is possible to replace the bulbs or the headlight. Reassembly is done in the same way as disassembly but in reverse.
Posted on 6 March 2024 by ScegliAuto
Where are the headlight fuses located in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this video we can see where the headlight fuses are located in the Toyota RAV4, useful in case one or more bulbs suddenly stop working. As shown,
How to replace the Toyota RAV4 headlight bulb
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you want to replace the headlight bulb of your Toyota RAV4 fourth series (year 2013-2018) yourself, just carefully follow the instructions describ
How to remove the headlight bulbs on a Toyota Rav4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Let's see how to remove the headlight bulbs on a Toyota Rav4. We open the bonnet by pulling the lever located at the bottom right of the dashboard, l Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.080
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |