Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a Toyota Camry

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Changing the oil is a fundamental task to ensure maximum engine health and optimal performance. The steps to follow are very simple and only require a bit of patience.

Remember to perform everything with the engine off to operate safely and with the oil at a low temperature. Lift the car with a hydraulic jack and remove the plastic cover located under the engine.

Locate the oil pan, place a drain pan underneath, and proceed to remove the drain plug. Allow all the used oil to flow out. Then, reinsert the drain plug.

Finally, move to the hood and pour the new oil into the oil pan.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Toyota Camry
How to Change the Engine Oil in a Toyota Camry
Toyota Camry (1997-2001 / Xv20) Open the oil cap. Lift the vehicle on a lift and place a catch basin under the vehicle. Now open the drain plug and let the old oil completely drain …
How to Perform DIY Maintenance on a Toyota Camry
How to Perform DIY Maintenance on a Toyota Camry
Toyota Camry (2011-2019 / Xv50) In this video, you will learn the steps to perform DIY maintenance on a Toyota Camry. The first recommended check is to rotate the tires every 10,000…
How to Replace the Oil and Oil Filter on a Toyota Camry
How to Replace the Oil and Oil Filter on a Toyota Camry
Toyota Camry (2018-2024 / Xv70) To replace the oil and oil filter on a Toyota Camry, lift the front of the car. Remove the upper engine cover, take out the dipstick, and use a 14 mm…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos