Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

Remove the small cover next to the opening handle and the one behind the window switch buttons, using a small flathead screwdriver. At this point, unscrew the two exposed screws.

Remove the window switch panel by prying with a plastic wedge and disconnect its connector. Also, detach the retaining clips located on the side of the door.

Using the plastic trim tool again, you can now remove the door panel by prying all around the structure until it comes away from its seat. Proceed in reverse for reassembly.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Toyota Yaris
Removing the Door Panel of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) In this video tutorial, you will learn how to remove the front door panel of a third-generation Toyota Yaris by following these simple instructions. …
How to Remove the Door Panel of a Toyota Yaris
How to Remove the Door Panel of a Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) Before you start, open the front door of your Toyota Yaris. Begin by unclipping and removing the window switch controls, then disconnect the associat…
Removing the Door Panel on a Toyota Yaris
Removing the Door Panel on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Is the door panel on your Toyota Yaris in need of replacement? Here’s how to remove it. Disconnect the battery terminals located in the engine bay (i…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos