Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2016 Toyota 4Runner

Model: Toyota 4runner N280 - Years 2010-2024
Part: Warning light – error code

To reset the maintenance light on your 2016 Toyota 4Runner, it only takes a few seconds. Furthermore, if you follow the instructions below, you won't need any diagnostic tools. First, insert the key and turn it to the 'On' position to activate the instrument cluster. Next, locate and press the button just below the speedometer for a few seconds. Finally, release the button and turn off the ignition. At this point, the reset is complete, and you won't see the light come on during the next start.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on a 2021 Toyota 4Runner
How to Reset the Maintenance Light on a 2021 Toyota 4Runner
Toyota 4runner (2010-2024 / N280) In this new mini guide for all of you who own a 2021 Toyota 4Runner, discover how to manually reset the maintenance light that appears on the instrum…
How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Tire Pressure Light on a Toyota 4Runner
How to Reset the Tire Pressure Light on a Toyota 4Runner
Toyota 4runner (2010-2024 / N280) In this brief guide, you will find instructions to reset the tire pressure light on a Toyota 4Runner. Before resetting the TPMS sensors, ensure that …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos