Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber of the Toyota Tacoma?

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Shocks

See other generations:
Video tutorial

To replace the front shock absorber of the Toyota Tacoma, you need to remove the wheel corresponding to the shock absorber being replaced: by unscrewing the appropriate bolts, you can take the wheel off the axle and access the shock absorber. You must loosen the bolts that secure the shock absorber at the top and bottom so that it can be removed and replaced with a new part.

The new shock absorber can then be secured with the appropriate screws at both the top and bottom, and the corresponding wheel can then be reattached.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Shock Absorber on a Toyota Tacoma
How to Replace the Front Shock Absorber on a Toyota Tacoma
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) To replace the front shock absorber on a Toyota Tacoma, lift the vehicle with a jack so that the wheel corresponding to the shock absorber being repl…
How to Replace the Rear Shock Absorber on a Toyota Tacoma
How to Replace the Rear Shock Absorber on a Toyota Tacoma
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) To replace the rear shock absorber on a Toyota Tacoma, lift the vehicle so that the corresponding rear wheel is off the ground. Once the wheel is lif…
How to Replace the Headlight Bulb on a Toyota Tacoma?
How to Replace the Headlight Bulb on a Toyota Tacoma?
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) To replace the headlight bulb on a Toyota Tacoma, open the hood and access the back of the headlight, where the connector for the bulb to be replaced…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos