Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Toyota C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

To replace the battery of the Toyota C-HR, open the bonnet and access the engine bay, as the battery is located here near the right front headlamp. To remove it from its housing, disconnect the terminals and unscrew its securing bolts.

You can then grasp it by its handles and pull it out of its housing; the new battery can then be inserted into the housing, secured with the appropriate bolts, and connected to the terminals before closing the front bonnet.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Toyota C-HR?
How to Replace the Remote Battery in a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To replace the battery in a Toyota C-HR remote, move the tab located at the bottom of the remote to extract the key from its housing. By levering her…
How to Replace the Key Battery for the Toyota C-HR
How to Replace the Key Battery for the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button …
How to Replace the Battery in a Toyota C-HR
How to Replace the Battery in a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today’s steps will guide you on how to remove and replace the battery in a Toyota C-HR by following these simple instructions. First, open the bonnet…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos