Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Engine Oil Replacement

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine oil

See other generations:
Video tutorial

To carry out this maintenance quickly and conveniently, lift the vehicle on a lift; alternatively, it may be sufficient to raise it on suitable axle stands. In any case, once you reach the oil sump, unscrew the oil drain plug while positioning a container to collect the used oil (keep the container as close as possible to the plug as the oil exits with considerable force).

Once the draining is complete, clean the plug thoroughly, removing any metallic residues, and screw it back in, securing it with a torque wrench. If the oil filter has already been replaced in the previous maintenance, it can be skipped, but given the low cost, it is recommended to replace it at every oil change.

Finally, fill the engine with new oil until the maximum level is reached.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Gearbox Oil Replacement
Gearbox Oil Replacement
Toyota Yaris (2005-2011 / Xp90) The gearbox oil also requires periodic replacement. If you experience gear engagement problems, it is advisable to replace the oil as soon as possibl…
Engine Oil Replacement for Toyota Yaris 1.0 Petrol
Engine Oil Replacement for Toyota Yaris 1.0 Petrol
Toyota Yaris (2005-2011 / Xp90) When replacing the engine oil and its filter, consider using specific additives that can enhance engine performance and resolve or mitigate any oil c…
Gear Oil Replacement Instructions
Gear Oil Replacement Instructions
Toyota Yaris (1999-2005 / Xp10) Gear oil is certainly one of the most neglected components by motorists (and sometimes even by mechanics) because checking the level is quite complic…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos