|
Do it yourself
| |||
| ||||
How to Clean the Air Conditioning Ducts on the Toyota Highlander
Model: Toyota Highlander
Xu50
- Years 2014-2019
Keeping the air inside our vehicle clean is a responsibility towards ourselves and those travelling with us. First, replace the air conditioning filter on your Toyota Highlander. It is located behind the glove compartment, which needs to be emptied and unlatched. Behind it, you'll find a small cover that, once unlatched, will reveal the dirty filter for removal. Next, let's focus on the air ducts. Access them through the front grille located under the windscreen. You can easily remove it. Clean it carefully while inside the vehicle, turn on the air conditioning to maximum, and clean the metal grilles and the now empty filter compartment by spraying a suitable product, which can be found on major e-commerce platforms for just a few pounds. This will thoroughly clean the ducts; now turn on the recirculation. The cleaning will be even deeper. Now, refit the pollen filter into its housing, and also replace the front grille under the windscreen, which should be clean. Job done.
Updated on 11 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Toyota Highlander
(2014-2019 /
Xu50)
Before starting the spark plug replacement on the Toyota Highlander, secure the vehicle on a stable and safe ramp or flat surface. Take this precauti…
Toyota Highlander
(2008-2013 /
Xu40)
The fuses in the Toyota Highlander are divided within the appropriate fuse boxes located inside the vehicle: this model has two. The first is found i…
Toyota Highlander
(2008-2013 /
Xu40)
This guide provides instructions for removing and replacing the cabin air filter on a Toyota Highlander. First, get inside the vehicle on the front p…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.797
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |