Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

In this video tutorial, you will learn how to replace the battery in a Toyota C-HR. First, open the engine bay by lifting the bonnet and securing it in place with the appropriate prop. At this point, locate the battery, situated on the right side next to the engine.

Using a socket wrench, unscrew the fastening nuts on the battery support; also with a socket wrench, unscrew the fastening nuts of the terminals, ensuring you disconnect the negative terminal first and then the positive. Once the nuts at the base are removed, you can extract the exhausted battery and proceed to replace it with the new one. Position the battery in the designated space and screw in the fastening nuts for both the base and the terminals, ensuring you connect the positive terminal first and only then the negative.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota C-HR
How to Replace the Battery in a Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today’s steps will guide you on how to remove and replace the battery in a Toyota C-HR by following these simple instructions. First, open the bonnet…
How to Replace the Key Battery for the Toyota C-HR
How to Replace the Key Battery for the Toyota C-HR
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) If you need to replace the battery in your Toyota C-HR key yourself, follow the procedure described below step by step. First, purchase a new button …
How to Replace the 12V Battery on a Toyota CH-R
How to Replace the 12V Battery on a Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Below are the instructions for removing and replacing the 12V battery on a Toyota CH-R. First, open the vehicle's bonnet and start by removing the pl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos