Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Highlander
    4. : How to replace the engine air filter on Toyota Highlander [USA]

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Air filter
Operation: How to replace the engine air filter on Toyota Highlander [USA]

Open the bonnet by lifting the lever located at the bottom under the dashboard near the driver's side door. Locate the crankcase in the bonnet that contains the filter located on the right side of the engine compartment. To open the casing that contains the filter, it is necessary to unhook the hooks on the sides. At this point, lift the cover and take out the air filter. Take the new filter which must have the specifications required for the engine (see the use and maintenance manual of the vehicle). Pay attention to the direction of positioning of the filter before inserting it in the box. Finally, reposition the cover and secure it with the hooks.


Posted on 15 October 2022 by ScegliAuto



How to replace the engine air filter on Toyota Highlander [USA]
Toyota Highlander (2008-2013 / Xu40) To replace the engine air filter it is necessary to open the bonnet by pulling the lever located under the dashboard of the passenger compartment on
How to replace the air filter on Toyota Highlander V6 Xu 20
Toyota Highlander (2001-2007 / Xu20) We see in this video the steps that will allow us to disassemble and replace the engine air filter of the Toyota Highlander Xu 20, with V6 engine. Fi
How to replace the air filter of the Toyota Highlander.
Toyota Highlander (2001-2007 / Xu20) The air filter in your Toyota Highlander is undoubtedly one of the most important and at the same time the most subject to wear components. Its main

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos