Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Engage or Disengage the Steering Lock on a Toyota Camry

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief and simple guide, you will learn how to engage or disengage the steering lock on a Toyota Camry. First, get inside the vehicle and start the engine, putting the transmission in park; then turn off the vehicle and turn the key, slightly rotating the steering wheel to engage the steering lock, as shown in the video.

At this point, turn the key and slightly rotate the steering wheel to remove the steering lock; the procedure for engaging the steering lock with a push-button ignition instead of a key is also shown!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Replace the Power Steering Pump on a Toyota Camry?
How to Replace the Power Steering Pump on a Toyota Camry?
Toyota Camry (2006-2013 / Xv40) To replace the power steering pump on a Toyota Camry, open the hood to access the components in the engine compartment. Here, you can locate the bolt…
How to Unlock the Steering Lock in Your Car
How to Unlock the Steering Lock in Your Car
Toyota Camry (2018-2024 / Xv70) Here’s how to unlock the steering lock in seconds. Turn on the ignition and hold the steering wheel firmly, turning it slightly to the right and left…
Where Are the Fuses in a Toyota Camry?
Where Are the Fuses in a Toyota Camry?
Toyota Camry (2011-2019 / Xv50) The fuses in a Toyota Camry are located inside the designated fuse boxes installed within the vehicle. This model has two: the first is positioned be…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos