Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Engine oil and filter replacement

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Engine oil
Operation: Engine oil and filter replacement

The necessary tools are: - a funnel - a bucket with a capacity of at least 5 liters - a wrench, size 14 - wrench for disassembling the oil filter Unscrew the oil cap and remove the dipstick, to drain the oil more quickly 'oil, place the pan under the engine in correspondence with the drain plug under the engine block and unscrew it using the 14 wrench, be careful not to lose the gasket on the cap. While the oil is coming out, unscrew the filter with the special wrench, paying attention to any oil leaks, removing the old filter make sure that there are no residues on the thread and that the old rubber gasket has not remained stuck. oil on the gasket of the new filter, to prevent it from getting stuck and pinched during assembly, and fit it in place making sure it is tight. Once the oil has completely flowed out, carefully check the gasket on the cap, replace it if necessary, and screw it back on to the engine. Top up the oil, using the funnel, a little at a time and checking the dipstick not to exceed the maximum. The video refers to a Toyota Yaris 1.5 TS


Posted on 22 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2005-2011 - How many liters of oil go into the engine of the Toyota Yaris petrol? Read Answer
    • Yaris 1999-2005 - What is the correct amount of motor oil for the Toyota Yaris? Read Answer
    • Yaris 2005-2011 - How many liters of engine oil are needed in a Toyota Yaris? Read Answer
    • Yaris 2005-2011 - What is the amount of engine oil that goes into the Yaris 1.4 D4D? Read Answer
    • Yaris 2011-2019 - How much engine oil does Toyota Yaris 1.4 contain? Read Answer
    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read Answer
    • Yaris 2005-2011 - How much and which oil does Toyota Yaris 1000 use? Read Answer
    • Yaris 1999-2005 - How much oil does the Toyota Yaris 1000 engine contain? Read Answer
    • Yaris 2005-2011 - What is the tightening torque of the 2010 Toyota Yaris diesel engine oil cap? Read Answer
    • Yaris 1999-2005 - How many liters of oil in the Toyota Yaris 1.0 petrol Read Answer
    • Yaris 1999-2005 - How much oil does the Toyota Yaris Verso engine contain? Read Answer
    • Yaris 2005-2011 - How much oil does the Toyota Yaris 1.4 d4d need servicing? Read Answer
    • Yaris 2005-2011 - After how many km do you have an oil change on the 2008 Toyota Yaris 1.0? Read Answer
    • Yaris 2005-2011 - How much engine oil does the Toyota Yaris 1.0 fit? Read Answer
    • Yaris 2005-2011 - How much oil is there in the Toyota Yaris D4D engine? Read Answer
    • Yaris 2005-2011 - How many liters of oil go into the Toyota Yaris 1.4 D4D engine? Read Answer
    • Yaris 2005-2011 - How much does the Toyota Yaris service cost? Read Answer
    • Yaris 2005-2011 - How many liters of oil do you need for the maintenance of the Toyota Yaris 1.0? Read Answer
    • Yaris 1999-2005 - How much oil goes into the Toyota Yaris 1.0 engine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos