Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Engine Oil and Oil Filter

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle and secure it. Using a spanner, gently unscrew the oil sump plug, allowing it to drain into a container. At the same time, open the oil filler cap on the engine to allow complete drainage.

Using the appropriate tool, gently unscrew the oil filter by acting on the body and remove it from its housing. Empty the residual oil from the container and filter into a container.

Clean the filter seat thoroughly with a cloth. Replace the rubber seal of the container.

Replace the used cartridge with a new one of the same type. Refit the oil filter, ensuring it is screwed in correctly, and top up with new oil. Do not dispose of used oil in the environment; take it to the appropriate collection centres.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Toyota Yaris (1999-2005 / Xp10) How do you replace the oil filter on a Toyota Yaris? Lift the car on a column lift and drain the used oil from the engine, then move on to removing t…
Toyota Yaris (2011-2019 / Xp130) In this video tutorial, you will see how to change the engine oil on a Toyota Yaris Hybrid by following a few simple steps: for this engine, use 0W20…
Toyota Yaris (1999-2005 / Xp10) To change the engine oil on a Toyota Yaris, you need to access the underside of the car: here you will find the oil drain plug. Open it with a spanne…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos