Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

Lift the car using appropriate jacks and secure it with suitable supports to prevent it from falling, allowing you to work safely. Place a plastic sheet and an oil collection tray under the engine.

Unscrew the oil cap on the sump and let it drain. Using a ratchet spanner, gently unscrew the oil filter and remove it from its housing.

Replace the used filter cartridge with a new one, and also replace the O-ring seal. Close the oil cap, reattach the oil filter, and top up with new oil. After a test drive, check the oil level again.

Do not dispose of used oil in the environment; take it to designated collection centres. Reset the onboard computer for the new service.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Engine Oil Filter Replacement
Engine Oil Filter Replacement
Toyota Yaris (1999-2005 / Xp10) Lift the vehicle using a hydraulic lift to gain easy access underneath: the oil filter is clearly visible and is located right next to the flange con…
Replacement of Engine Oil and Oil Filter
Replacement of Engine Oil and Oil Filter
Toyota Yaris (2005-2011 / Xp90) Lift the vehicle and secure it. Using a spanner, gently unscrew the oil sump plug, allowing it to drain into a container. At the same time, open the …
How to Replace the Oil Filter on a Toyota Yaris
How to Replace the Oil Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How do you replace the oil filter on a Toyota Yaris? Lift the car on a column lift and drain the used oil from the engine, then move on to removing t…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 1999-2005 - How many liters of oil can be loaded on Toyota Yaris 1300 cc first series? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos