Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a New Car Stereo in a Toyota Venza?

Model: Toyota Venza MK  1, Av10 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

First, remove the plastic cover on the center dashboard and unscrew the mounting screws of the car stereo. Gently pull off the button panel and disconnect the plugs.

Remove the screws located underneath it to free the car stereo, which you can now extract. Again, disconnect the electrical connectors.

Separate the old car stereo from the trim where you will install the new car stereo. Now connect the plugs to the new car stereo, following the steps in reverse order.

If necessary, replace the antenna as well.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Toyota Venza
How to Replace the Remote Battery on a Toyota Venza
Toyota Venza (2020-2026 / MK  2, Xu80) To replace the remote battery on a Toyota Venza, pull the key out of its housing by using the lever located at the top of the device: this way, the k…
How to Replace the Headlight Bulb on a Toyota Venza
How to Replace the Headlight Bulb on a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) To replace the headlight bulb on a Toyota Venza, open the hood to access the components at the back of the corresponding headlight. Disconnect the co…
How to Reset the Service Light on the Toyota Venza 2
How to Reset the Service Light on the Toyota Venza 2
Toyota Venza (2020-2026 / MK  2, Xu80) To complete the manual reset of the service light on the instrument cluster of your second generation Toyota Venza, follow the steps outlined in this…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos