Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on the Toyota Corolla, you must first inflate all tyres to the recommended pressure: this value is indicated on the sticker attached to the driver's door pillar. Once all tyres are correctly inflated, turn on the instrument cluster by turning the key: then locate the SET button found at the bottom of the dashboard, below the steering column.

While holding this button, the light will completely reset, disappearing from the instrument cluster.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning on the Toyota Corolla
How to reset the tire pressure warning on the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Following these short and simple instructions, we will see how to reset the tire pressure warning light of the Toyota Corolla; before resetting the T…
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tyre pressure warning light on the Toyota Corolla, inflate the tyres until they reach the recommended pressure value: this value is indi…
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tyre pressure warning light on the Toyota Corolla, inflate the tyres until they reach the correct pressure value, which is indicated on …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos