Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Where is the interior fuse box located in the Toyota Land Cruiser J200?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Fuse box
Operation: Where is the interior fuse box located in the Toyota Land Cruiser J200?

In the following guide, we will discover together where the box containing all the various fuses of the interior of your Toyota Land Cruiser J200 (year 2007-2022) is located. First of all, the vehicle must be completely turned off for safety reasons. Then, move to the driver's seat and locate the compartment located at the bottom of the dashboard, specifically on the left side of it. At this point, open the compartment with your own hands and locate the fuses you were looking for. To work on them, remember to disconnect the car battery first.


Posted on 30 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - Where are the fuses located on the Toyota Land Cruiser d4d? Read Answer
    • Land Cruiser 2007-2021 - Where are the fuse boxes located on Toyota Land Cruiser j150? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos