Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Tacoma
  6. : Resetting the tire pressure control on a Toyota Tacoma.

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N270, N260, N250, N240, N220, MK 2 - Years 2005-2015
Part: Checks and maintenance
Operation: Resetting the tire pressure control on a Toyota Tacoma.

Resetting the tire pressure on a second-generation Toyota Tacoma, produced from 2005 to 2015, is a very simple and quick operation as there are no specific procedures to follow. However, before performing the reset, it is very important to check the correct tire pressure of all four tires as indicated by the manufacturer. Let's now see the procedure. First, we need to start the vehicle, then press and hold the dedicated reset button located under the dashboard to the left of the steering wheel. Once done, we will see the tire pressure indicator light start flashing on the speedometer. We should continue to hold the button until it disappears completely.


Posted on 27 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Tacoma 2016-2025 - How much does the Toyota Tacoma cost? Read Answer
    • Tacoma 2016-2025 - What are the causes of jerks on the 2016 Toyota Tacoma? Read Answer
    • Tacoma 2005-2015 - Why does the Toyota Tacoma Mk2 have trouble starting? Read Answer
    • Tacoma 2016-2025 - What to do when Toyota Tacoma car jerks? Read Answer
    • Tacoma 1995-2004 - What problems does the window regulator have on the Toyota Tacoma? Read Answer
    • Tacoma 2016-2025 - What is the cause of the Toyota Tacoma acceleration problem? Read Answer
    • Tacoma 2005-2015 - What causes the Toyota Tacoma turn signals problem? Read Answer
    • Tacoma 2005-2015 - What is causing the incorrect fuel level reading on Toyota Tacoma? Read Answer
    • Tacoma 1995-2004 - How do you adjust the Toyota Tacoma clutch pedal? Read Answer
    • Tacoma 2016-2025 - What causes the 2017 Toyota Tacoma acceleration problem? Read Answer
    • Tacoma 1995-2004 - How to fix an idle problem on 2000 Toyota Tacoma? Read Answer
    • Tacoma 2005-2015 - How to reset Toyota Tacoma engine idle? Read Answer
    • Tacoma 1995-2004 - What to do if you have a problem with the ignition switch on the 1998 Toyota Tacoma ?? Read Answer
    • Tacoma 2016-2025 - What problems can idling cause on the Toyota Tacoma? Read Answer
    • Tacoma 2005-2015 - What caused the fuel gauge problem on Toyota Tacoma? Read Answer
    • Tacoma 1995-2004 - Why does the Toyota Tacoma ignition cylinder not work and lock up? Read Answer
    • Tacoma 2016-2025 - What are the Toyota Tacoma radio volume problems? Read Answer
    • Tacoma 2016-2025 - Why does the Toyota Tacoma struggle with acceleration? Read Answer
    • Tacoma 1995-2004 - What problems can the Toyota Tacoma power window have? Read Answer
    • Tacoma 2005-2015 - What to do in case of a problem with the power windows of the Toyota Tacoma of 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos