Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Bearings

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

The following guide shows how to replace the bearings on your car. When starting the replacement, loosen and then remove the bolts of the wheel, which should be lifted with the help of a jack. Then unscrew the bolts and remove the wheel, and also remove the brake caliper using a socket wrench or screwdriver.

Once the caliper is removed, take off the dust cover, also known as a metal or plastic cap depending on the car. Inside, you will find the retaining clip that needs to be unscrewed with a pair of pliers. Once this is done, mount the new bearings, ensuring they are aligned as the old ones were removed, and then reassemble the iron disc and the wheel with its bolts.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to clean and rebuild the starter motor in a Toyota Yaris
How to clean and rebuild the starter motor in a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Cleaning and rebuilding the starter motor is not difficult but it requires a bit of patience. Disconnect the battery, remove the starter motor, usual…
Replacing the Anti-Roll Bar on Your Car
Replacing the Anti-Roll Bar on Your Car
Toyota Yaris (2005-2011 / Xp90) This guide shows, in its various steps, how to replace the anti-roll bars on your car. To perform this task, you will need to lift the car and secure…
DIY Brake Pad Replacement
DIY Brake Pad Replacement
Toyota Yaris (2005-2011 / Xp90) Here is a simple guide showing you how to perform this maintenance task on your car quickly and only spending on replacement parts. To start, lift th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos