Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Shock absorber support replacement

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Suspensions
Operation: Shock absorber support replacement

If you hear some noise coming from the high suspension flap and you notice some resistance in the steering return, then it is likely that the shock absorber supports may have been damaged: in order to replace them, you must therefore remove the front shock absorber and use the appropriate ones. clamps for crushing the spring; therefore lift the car on the bridge, remove the front wheel, remove the cable guides from the shock absorber and unscrew the pins that secure it to the hub support; then access the engine compartment and unscrew the fixing nuts of the support to the bodywork dome to extract the shock absorber from its seat; then apply the clamps to squeeze the spring and be able to remove the support from the stem and then install the new one.


Posted on 16 September 2023 by ScegliAuto



Replacement of front shock absorbers
Toyota Yaris (2005-2011 / Xp90) To replace the front shock absorbers it is first of all necessary to have the appropriate tool to compact the spring; then lift the car on the bridge
Rear shock absorber replacement
Toyota Yaris (2005-2011 / Xp90) The replacement of the rear shock absorbers is quite simple to carry out mainly because the springs are applied externally to the shock absorber; the
Rear shock absorber replacement
Toyota Yaris (1999-2005 / Xp10) The replacement of the rear shock absorbers is very simple to carry out since the spring and the damper are not coaxial; once the car has been raised

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos