Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Toyota Aygo?

Model: Toyota Aygo Ab40, MK 2 - Years 2014-2023
Part: Tail light bulb

In this tutorial, you will learn how to replace the rear light bulbs on a Toyota Aygo, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot. Locate the two bolts along the inner edge of the light unit and remove them using a 10 mm socket. Next, pry around the perimeter of the light with a plastic spatula, detach it from the bodywork, and extract the faulty bulb by turning it counterclockwise. Now, simply insert the replacement bulb and reassemble everything.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights of the Toyota Aygo
How to replace the rear lights of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) In a few simple steps, we will see the process of disassembling and replacing the rear headlight bulbs of the Toyota Aygo. First, open the rear trunk…
How to replace the rear tail light bulb of a Toyota Aygo
How to replace the rear tail light bulb of a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) In the video, we can see the procedure to follow in order to change the rear light bulb of a Toyota Aygo. Before starting, make sure you have the nec…
Replacement of the rear headlight bulbs of the Toyota Aygo
Replacement of the rear headlight bulbs of the Toyota Aygo
Toyota Aygo (2005-2014 / MK 1, Ab10) The steps outlined in this guide will show us how to disassemble and replace the rear headlight bulbs of the Toyota Aygo. First, we open the rear hat…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos