Do it yourself
Frequently asked questions about cars and motorcycles

Cabin Air Filter Replacement Procedure

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Cabin air filter

The procedure for replacing the cabin air filter is straightforward; just follow the steps outlined in this guide. This maintenance can be done independently without needing a mechanic's assistance. The first step is to remove the dashboard trim; be careful as, in addition to the screws to unscrew, the trim is also secured by clips along its entire length. Carefully remove the trim while paying attention to the connection of the cigarette lighter. The cigarette lighter has a visible cable that must be disconnected. There is no need to remove anything else; you will see the hazard light switch, but do not touch it; leave it connected to the dashboard unless you want to replace it while changing the air filter. If not, leave everything as it is. Now, locate the filter, pull it towards you in the same direction. The rest is straightforward; position the new air filter and follow the procedure in reverse order.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this new mini guide, we will show you a simple and effective method to replace the cabin air filter in your Toyota Rav in just a few minutes. Befo…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this video, you will see how to replace the cabin air filter on your Toyota RAV4. Open the glove compartment and unclip the support as shown at mi…
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To replace the cabin air filter in a Toyota RAV4, open the glove compartment on the passenger side and remove its contents. Detach the small side dam…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos