Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Fortuner
    4. : Where are the fuses located in the Toyota Fortuner?

Toyota Fortuner - Video tutorial

Model: Toyota Fortuner An50, An60 - Years 2005-2015
Part: Fuse box
Operation: Where are the fuses located in the Toyota Fortuner?

The fuse boxes of the Toyota Fortuner are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in this type of vehicle, three can be identified. The first of these is located on the right side of the engine compartment and contains the fuses for the low beam headlights, fog lights, windshield wipers, etc. The other two boxes are instead located inside the cabin, under the steering column and behind the glove compartment on the passenger side: these contain the fuses that regulate the operation of the air conditioning, instrument panel, cigarette lighter, etc.


Posted on 18 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Fortuner 2005-2015 - Where is the fuse for the Toyota Fortuner's cigarette lighter located? Read Answer
    • Fortuner 2015-2023 - Where are the fuses located in the Toyota Fortuner? Read Answer
    • Fortuner 2015-2023 - Where is the air conditioning fuse located in the Toyota Fortuner? Read Answer
    • Fortuner 2005-2015 - Where is the fuse for the Toyota Fortuner's cigarette lighter located? Read Answer
    • Fortuner 2005-2015 - Where is the cigarette lighter fuse located in the Toyota Fortuner/Hilux? Read Answer
    • Fortuner 2015-2023 - Where is the fuse box located in the Toyota Fortuner? Read Answer
    • Fortuner 2015-2023 - What is the location of the horn relay on the Toyota Fortuner? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos