Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. 4runner
    4. : How to reset the service light on the Toyota 4Runner?

Toyota 4runner - Video tutorial

Model: Toyota 4runner N210 - Years 2002-2009
Part: Fuse box
Operation: How to reset the service light on the Toyota 4Runner?

In this tutorial, we can see how to reset the service in the Toyota 4Runner, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. We start by going inside the cabin, then insert the key and turn on the instrument panel. We then reach the "ODO" partial odometer using the button located on the right side of the dashboard, turn off the panel and turn it back on while holding down the same button, releasing it only once the interval has been reset correctly.


Posted on 3 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 4runner 2010-2023 - Where is the fuse for the Toyota 4Runner cigarette lighter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos