Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Highlander
  6. : Deactivation of the front passenger airbag of the Toyota Highlander

Toyota Highlander - Video tutorial

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Checks and maintenance
Operation: Deactivation of the front passenger airbag of the Toyota Highlander

Today's instructions will show us the process of activating and deactivating the front passenger airbag of the Toyota Highlander. First of all, we get on board the vehicle and start the engine; in fact, the vehicle is equipped with a sensor under the seat capable of detecting the presence of the passenger, activating the airbag in this case. If no passenger is detected, then the airbag will be automatically deactivated and no manual action will be required. On the dashboard, we will see the indicator light that shows us whether the airbag is activated or deactivated.


Posted on 4 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos