Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump in the Toyota Corolla?

Model: Toyota Corolla MK 1 - Years 1995-2002
Part: Fuel pump

In this tutorial, you will see how to remove the fuel pump in the Toyota Corolla, a very simple and quick operation. Before doing this, to operate safely, open the bonnet and disconnect the negative terminal of the battery. Start by opening the left rear door, then lift the seat and separate it from the base. Next, unclip the indicated cap using a flathead screwdriver, disconnect both the power connector and the hose, and unscrew all screws around the perimeter. At this point, you can extract the pump from the tank, insert the replacement, and reassemble everything.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on a Toyota Corolla
Replacing the Fuel Pump on a Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Follow these instructions to remove and replace the fuel pump on a Toyota Corolla. First, open the rear doors and begin by removing the rear seat. Ne…
How to replace the fuel pump of the Toyota Corolla.
How to replace the fuel pump of the Toyota Corolla.
Toyota Corolla (2000-2007 / MK 2) Let's discover the useful instructions on how to disassemble and replace the fuel pump of the Toyota Corolla in simple steps. First, we open the rear…
How to Remove and Replace the Fuel Pump in the Toyota Corolla
How to Remove and Replace the Fuel Pump in the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below are the step-by-step instructions to remove and replace the fuel pump in the Toyota Corolla. First, open the rear doors and start by removing t…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos