Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aygo
    4. : Location of the fuses in the Toyota Aygo MK1

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: Fuse box
Operation: Location of the fuses in the Toyota Aygo MK1

Knowing where to find the fuses that protect the utilities of the electrical system of the Toyota Aygo is important if we are trying to find the cause of a sudden cessation of operation of one of these. Let's position ourselves at the wheel of the car and rotate it ninety degrees to the right, unscrew the screw that we will discover on the steering column, now rotate the wheel to the left to discover and unscrew the screw on the opposite side. Remove the frame of the small instrument panel and we will discover the fuses to the right and left of the speedometer. To identify the fuse we are looking for, consult the diagram in the owner's manual.


Posted on 10 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Aygo 2014-2023 - Where is the fuel pump relay located in the Toyota Aygo? Read Answer
    • Aygo 2014-2023 - Where is the fuse box located in the Toyota Aygo? Read Answer
    • Aygo 2014-2023 - What is the location of the Toyota Aygo fuse box? Read Answer
    • Aygo 2014-2023 - Location of Toyota Aygo fuses? Read Answer
    • Aygo 2014-2023 - Where are the fuses located on Toyota Aygo? Read Answer
    • Aygo 2005-2014 - Where are the Toyota Aygo fuses located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos