Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on the MAN TGS

Model: (Various brands) Various
Part: Service warning light

On the MAN TGS, the maintenance interval reset is performed with the vehicle stationary and the engine off. Turn the ignition to ON. Using the navigation buttons on the dashboard/steering wheel of the MAN TGS, open the vehicle menu, scroll to the "Maintenance/Service" section, and select "Reset interval." Confirm the reset request by pressing the OK/Set button and wait for the confirmation message. Once the operation is complete, turn off and then turn on the ignition again to ensure that the warning does not appear anymore. If the reset option does not appear on your MAN TGS, go to the Diagnostics/Service Data menu and check for the "Oil service reset" command; alternatively, some configurations require the reset to be done via diagnostic instrumentation as shown in the video. If confirmation is not received, repeat the sequence, ensuring to follow the order and timing, with the door closed and the battery well charged.

Posted on 18 December 2025 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Let's find out where the fuses are installed on the Man Tgs, in common with the Man Tgs and Tgl vehicles, in fact the video guide mentioned here refe…
(Various brands) Various Today we will explain how to reset the ABS light, which may be due to an error or a blockage of air or a broken pipe, on a MAN TGS truck. To reset th…
(Various brands) Various The fuses of the MAN TGS are located inside the only fuse box present in the vehicle: in this type of vehicle, the box is contained within the dashbo…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos