Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Engine Oil Seal

Model: (Various brands) Various

Video tutorial

In this video, you will learn how to replace the engine oil seal on a generic car. To replace it, access the underside of the car and remove all obstructions to reach the housing where the oil seal is located: then remove the retaining ring if present and extract the engine oil seal, using a pointed tool (taking care not to damage the bearing).

At this point, fit the new seal, lubricating it before inserting it into its housing in a perfectly straight position.

Finally, refit the retaining ring and reassemble the housing.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Camshaft Oil Seal?
How to Remove the Camshaft Oil Seal?
(Various brands) Various The video author demonstrates his method for removing the camshaft oil seal without disassembling the entire affected area. The YouTuber, as we can s…
How to Replace the Crankshaft Oil Seal?
How to Replace the Crankshaft Oil Seal?
(Various brands) Various To replace the crankshaft oil seal, first remove the engine block from its housing by loosening the mounting bolts and disconnecting pipes and connec…
How to Install a Oil Seal
How to Install a Oil Seal
(Various brands) Various In this guide, you will learn how to install an oil seal. First, you need to remove the old ones. To do this, insert a flat-head screwdriver between …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos