Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seals on a Bosch Fuel Pump

Model: (Various brands) Various
Part: Pump

If you need to replace the seals on the fuel pump in your vehicle, follow the instructions provided in the description below and refer to the video as well. After opening the bonnet, remove the four bolts located on the top of the pump. Then, use a sharp object to extract the cover seal and take the new seal to place it in position. Next, unscrew the other four bolts located under the cover and remove and replace the seal on the pump body. At this point, reassemble the various components in reverse order to complete the job.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disassemble a Diesel Injection Pump
How to Disassemble a Diesel Injection Pump
(Various brands) Various This is a specialised procedure: it is a guide to disassemble a diesel injection pump (Bosch V.E. type) for refurbishment. However, this is not a gar…
How to Replace Bosch Wiper Blades
How to Replace Bosch Wiper Blades
(Various brands) Various In this video, we can see how the YouTuber demonstrates replacing Bosch wiper blades. Specifically, this involves the budget model of wiper blades pr…
Procedure to Bleed Air Trapped in the Diesel Fuel System
Procedure to Bleed Air Trapped in the Diesel Fuel System
(Various brands) Various In this video tutorial, you can see the procedure to bleed air trapped in the diesel fuel system. If air remains in the fuel system, it will be impos…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos