Do it yourself
Frequently asked questions about cars and motorcycles

8 Things Not to Do with Manual Cars

Model: (Various brands) Various
Part: Transmission

In this video tutorial, discover the 8 things to avoid with a manual car. Firstly, it is important to use the clutch correctly; do not leave the car in gear at traffic lights to prevent damaging the clutch. Instead, leave the car in neutral. Do not keep your foot on the clutch pedal, as this can lead to noise and clutch failure over time, which can be costly to repair. Avoid releasing the clutch too quickly, as it puts excessive pressure on the engine and gearbox and can overheat the clutch, potentially causing damage. Do not rest your hand on the gear lever. Do not keep the clutch engaged when on an incline; if you need to stop while going uphill, ensure the car does not roll backwards. Many modern manual cars have hill start assist to keep the car stationary. Do not floor the accelerator at low engine revs to avoid stressing the engine. Do not put the car in neutral when going downhill, as this is dangerous and can lead to loss of control and overheating of the brakes. Never brake without using the clutch, as this could cause the car to stall.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various What should you avoid doing with a vehicle that has a manual gearbox? The first thing to absolutely avoid is resting your foot on the clutch, even li…
(Various brands) Various Here is a list of five things not to do with an automated manual transmission. First, avoid driving short distances in traffic jams; starting and sto…
(Various brands) Various In this video, our youtuber gives us advice that many of us, especially if we own a car with a manual transmission, don't even think about. Nowadays,…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos