Do it yourself
Frequently asked questions about cars and motorcycles

Brake Oil Change and Bleeding

Model: (Various brands) Various
Part: Checks and maintenance

Let's see how to change and bleed the brake oil: this procedure is generally suitable for all cars. Open the bonnet of the car. Remove the cap from the brake fluid reservoir. Raise the vehicle sufficiently. Use a jack and secure the vehicle with axle stands (do not rely solely on the jack). Remove the front wheels. Attach a container to the brake fluid bleed screw to collect the expelled fluid. Open this screw to allow the fluid to escape. To expel the fluid, you will need to operate the brake, so that the pressure on the pedal forces the fluid out. Once all the fluid has been expelled, close the bleed valve and add new fluid to the reservoir that you previously opened. Dispose of the used fluid correctly at an authorised centre. Brake fluid can be easily found on major e-commerce platforms. A bottle of Dot 4 Brembo, for example, costs £6.90 + £3.90 for delivery on Amazon. Pour it into its container and replace the cap. You can now close the bonnet and refit the wheels in their place.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Through this video tutorial, you will understand why it is important to replace brake fluid in a vehicle, specifically in a motorcycle: you should fr…
(Various brands) Various What the YouTuber tells us is correct: brake fluid is hygroscopic, meaning it naturally absorbs moisture from the air through the microporosity of th…
(Various brands) Various This video explains why - and how - to change the brake fluid. We all know that brake fluid does not wear out unless there are leaks in the lines. So…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos