Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light Using Vdc Software?

Model: (Various brands) Various
Part: AdBlue warning light

Video tutorial

Vdc is software that allows you to connect to a vehicle's control unit, provided it is technically enabled for this purpose, and perform diagnostics, checks, resets, and more. The connection is made via cable, using the OBD socket located inside the cabin, usually low down on the left of the driver.

Once the connection is enabled, using any laptop, open Vdc and select the vehicle model, engine type, and the sections of interest, which in this case relates to the Service, specifically the AdBlue. The final step is to locate the parameter to reset and confirm.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue Warning Light
How to Reset the AdBlue Warning Light
(Various brands) Various To reset the AdBlue warning light when it is flashing, accompanied by an audible signal and a message indicating that the remaining driving range is …
What to Do When the AdBlue Warning Light Comes On?
What to Do When the AdBlue Warning Light Comes On?
(Various brands) Various What to do when the AdBlue warning light comes on? When the AdBlue light illuminates and starts flashing, it means that the fluid in the designated r…
How to Reset the AdBlue Warning Light with the VCDS System
How to Reset the AdBlue Warning Light with the VCDS System
(Various brands) Various To reset the AdBlue warning light using the VCDS diagnostic system, follow the instructions below and refer to the video. First, connect your PC to t…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much does it cost to replace the AdBlue tank? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos