Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace and Remove the Alternator Pulley

Model: (Various brands) Various
Part: Alternator

As shown in the video, removing the alternator pulley is a similar operation for all cars with some minor variations. Ensure you have a new pulley to replace it and the kit to remove and refit it. As shown in the video, the auxiliary belt has already been removed. You will also need a ratchet and a 22mm spanner, and using a Torx 150 key, secure the alternator while loosening the pulley in an anti-clockwise direction. Once completely unscrewed, remove the ratchet, the Torx key, and finally the pulley. Grease the new pulley and refit it.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Let's look at dismantling the alternator of the car. Lift the front bonnet and disconnect the battery terminals, then raise the vehicle with a jack t…
(Various brands) Various In this video, you will see how to replace the alternator on a generic car. In fact, on most cars, the disassembly procedure is quite similar: essent…
(Various brands) Various This video shows you how to replace the alternator on any car. First, ensure you disconnect the negative battery terminal. On a transverse engine, th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos