Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : Installation of an additional diesel fuel filter

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Diesel filter
Operation: Installation of an additional diesel fuel filter

To prevent clogging in the diesel injection system due to fuel coming from not very clean tanks, we can install a small mesh filter near the fuel pump on our engine. With the engine off, open the hood and locate the diesel supply pipe, loosen the clamp holding the rubber hose and remove it, insert the filter hose holder into the rubber hose, making sure to respect the correct flow direction. Take a small piece of rubber hose suitable for fuel and insert one end into the other filter hose holder and the other end into the tank hose, tighten with metal clamps. Restore pressure in the system and start the engine to verify the success of the operation.


Posted on 4 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - When should the diesel filter be replaced? Read Answer
    • Vari - How do you bleed the air after replacing the fuel filter? Read Answer
    • Vari - Where is the fuel filter located? Read Answer
    • Vari - Where is the diesel filter located on the Volvo V40 D2? Read Answer
    • Vari - How often should the diesel filter be changed? Read Answer
    • Vari - How to find the diesel filter? Read Answer
    • Vari - What does it mean when the diesel filter light comes on? Read Answer
    • Vari - When should the diesel filter be replaced? Read Answer
    • Vari - How many km do you need to replace the diesel filter? Read Answer
    • Vari - How many kilometers should the diesel filter be changed? Read Answer
    • Vari - What does the diesel filter warning light mean? Read Answer
    • Vari - How often should the diesel filter be replaced? Read Answer
    • Vari - How many km do you change the diesel filter on Peugeot 2008? Read Answer
    • Vari - The diesel filter warning light comes on: what does it mean? Read Answer
    • Vari - How much does a Dacia Duster service cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos