Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the heating radiator of the Volkswagen Passat?

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Checks and maintenance

The procedure for replacing the cabin heater radiator involves loosening the screws that secure the right side panel of the footwell compartment: once this panel has been removed, it will be possible to locate the heater radiator inside the dashboard. By disconnecting all the pipes and connectors, it will be possible to loosen the screws that secure it to its supports, then inserting the new replacement part; once this has been connected and properly secured, it will be possible to close everything and check its operation.

Posted on 31 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (1996-2005 / 3BG, B5) Discover the main steps to remove and replace the internal heating radiator of the cabin on the Volkswagen Passat B5. First, open the bonnet and remo…
Volkswagen Passat (2010-2014 / B7) Before you can start, open the front bonnet of your Volkswagen Passat. Begin by unclipping and removing the air filter hose. This will give you acces…
Volkswagen Passat (2010-2014 / B7) To replace the heating radiator in a Volkswagen Passat, loosen the screws securing the side protection panel in the driver's footwell. Once the panel…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - How to unlock the Volkswagen Passat's lock? Read answer
    • Passat 2005-2010 - Why doesn't the Volkswagen Passat start up? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos