Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Volkswagen New Beetle

Model: Volkswagen New Beetle MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

These brief steps will show you how to reset the tyre pressure warning (TPMS) on the Volkswagen New Beetle; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; next, open the glove compartment and press and hold the TPMS reset button located inside until the warning on the instrument panel resets completely, as shown in the video.

Finally, turn off the ignition and start the engine!


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Volkswagen New Beetle
Resetting the Tyre Pressure Warning Light on the Volkswagen New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) Follow these step-by-step instructions to reset the tyre pressure warning light on the Volkswagen New Beetle. Before performing the reset, ensure all…
How to Reset the Tyre Pressure Light on a Volkswagen Beetle
How to Reset the Tyre Pressure Light on a Volkswagen Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To reset the tyre pressure light on a Volkswagen Beetle after inflating the tyres, turn on the ignition without starting the engine, open the glove c…
Resetting the TPMS Light on the Volkswagen New Beetle
Resetting the TPMS Light on the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Today, follow these brief instructions to reset the tyre pressure monitoring system (TPMS) light on the Volkswagen New Beetle. Before performing the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos