Do it yourself
Frequently asked questions about cars and motorcycles

Reasons why the glow plug light comes on in a Volkswagen engine

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Warning light – error code

In this video we can see what to do when the glow plug light comes on in a Volkswagen engine; usually the vehicle becomes very weak at this point. Naturally, as it is a workshop, the diagnosis is done with professional equipment and the error can lead to three different interpretations: problems with the variable geometry; a broken sleeve or a blocked turbine. We clear the error and set values to check during the road test, which excludes problems with the variable geometry. The evidence is a leak, which can only be verified with a specific tool that shows two leaks and we see a sleeve with a large vertical cut. Unfortunately, even though it is a minor replacement, to get there you have to dismantle quite a few pieces, but we have found the fault.

Posted on 13 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) How do you remove the glow plugs on a VW Polo? Here’s how to take out the glow plugs from the engine bay. Lift the front bonnet, then remove the engi…
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) A glow plug is essentially a resistor that, when powered, becomes incandescent to pre-heat the combustion chamber and create optimal thermodynamic co…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The tyre warning light mentioned, which is also present in the Volkswagen Polo 4, lights up when there is a flat tyre or more than one. Often, it can…

    Frequently Asked Questions

    • Polo 2009-2017 - How to enter the Volkswagen Polo radio security code? Read answer
    • Polo 2009-2017 - What does the catalyst warning light on the Volkswagen Polo 1.2 TDi indicate? Read answer
    • Polo 2009-2017 - What does the warning light with a yellow triangle on Volkswagen Polo mean? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos